Sounder Module; Installation - Siemens FS20 Mounting & Installation

Mounting and installation of the compact control panels
5

Sounder module

5.25 Sounder module

5.25.1 Installation

198 | 354
Building Technologies
Fire Safety
Sounder module FCI2005-A1 is fitted in the fire control panel. The sounder module
can be screwed flat onto the rear panel or mounting plate or engaged on the DIN
rail by means of the enclosed mounting feet FDCM291.
The following instructions show how the sounder module is mounted onto the DIN
rail.
Figure 107: Installation example: sounder module FCA2005
1 DIN rail
2 Mounting feet FDCM291
3 Sounder module FCA2005-A1
1. Insert the two mounting feet (2) laterally in the sounder module (3). Two
mounting feet must always be fitted together.
2. Push the sounder module (3) with the mounting feet (2) against the DIN rail (1)
until the mounting feet snap into place.
3. Wire up the sounder module according to the pin assignment.
X3
X2
X1
3
1
008851_s_en_--
2016-01-27