Siemens FS20 Mounting & Installation page 65

Building Technologies
Fire Safety
WARNING
Electrical voltage
Electric shock
● Before connecting the mains cable, make sure that the cable is current-free.
● Ensure that the mains is secured against inadvertently being switched on.
Installation
1. Lay the mains cable (5) along the left side of the housing.
2. Insulate the mains cable as needed and connect it to the disconnect
terminals (3) according to the pin assignment specified in the next chapter. Use
cable end sleeves for wires.
3. Fix the cable with the strain relief clamp (4).
4. Secure the cable with cable ties.
Mounting and installation of the compact control panels
Mounting and assembling a station
5
65 | 354
008851_s_en_--
2016-01-27