Siemens FS20 Mounting & Installation page 343

Building Technologies
Fire Safety
Assembly of desktop housing (FT2080)
5
Figure 201: Assembly of desktop housing
1 Fire terminal (Touch) FT2080
2 Top of desktop housing (FT2080) FHA2040
3 Tilting brackets on left and right for fixing the top of the housing
4 Guide cams on left and right for tilting brackets
5 2x threaded holes for fixing the top of the housing
6 Base of desktop housing
7 Fire terminal board FTI2001
1. Move the top of the housing (2) with the installed fire terminal (1) to the position
shown.
2. Gently press the two tilting brackets (3) inwards and lift the top of the
housing (2) into the two guide cams (4).
a The top of the housing is fixed in the open position and the tilting brackets
act like hinges.
Mounting and installation of fire terminal (Touch)
Installation in desktop housing (FT2080) FHA2040
1
7
2
3
4
5
6
343 | 354
008851_s_en_--
2016-01-27