Siemens FS20 Mounting & Installation page 338

Mounting and installation of fire terminal (Touch)
7
Installation in rear panel (FT2080) FHA2039
338 | 354
Building Technologies
Fire Safety
1. Wire up the flat cable from the fire terminal board X3 to the PMI & mainboard
X3.
2. Wire up the prefabricated cable of the supply from the EMC filter to the fire
terminal board X7.
3. Wire up the external cables of the supply, the FCnet and the Ethernet cable
through the cut-out in the desktop and the cable lead-throughs in the rear
panel.
Installing the fire terminal (Touch)
7
8
9
Figure 196: Installing the fire terminal (Touch) in the rear panel (Touch)
1 Fire terminal (Touch) FT2080
2 4x fixing screws
3 4x mounting holes in the fire terminal (Touch)
4 Cable lead-through in the rear panel
5 4x threaded holes in the rear cover (FT2080)
6 Lateral cable lead-throughs
7 Rear panel (FT2080) FHA2039
8 Cut-out in the desktop
9 Desktop
1
2
3
4
5
6
008851_s_en_--
2016-01-27