Siemens FS20 Mounting & Installation page 13

Version Edition date
p 2013-11-14
o 05.2012
n 05.2010
Building Technologies
Fire Safety
Brief description
Edition for MP5
Change to date format according to ISO 8601
New:
Mounting and installation of fire terminal (Touch) FT2080-A1
Installation of module bus cards for AlgoRex migration:
● Line card (AnalogPLUS) FCL2005-A1
● Line card (interactive) FCL2006-A1
● Line card (interactive Ex) FCL2007-A1
Corrections and additions:
● Note on Ethernet loop FN2008 added.
● RS485 module: Slot address assignment
● FC2080: Chapter 'Wiring the system supply and module bus' moved up one
level and detailed wiring diagrams added
● FC2080: Chapter 'Parallel connection of three power supplies' – Connection
diagram modified
● FC2080: Wiring diagram of the mains supply cable on carrier (19", power
supply) integrated
● FC2080: Installing the power supply kit (150 W) – Wiring, connection diagram
for mains supply cable modified
● FC2080: Key safe adapter, chapter on wiring with FDCIO222 added and
wiring via I/O card (programmable) changed (heating isolation integrated)
● Various minor corrections and adaptations
CPR replaces CPD: The Construction Products Regulation (CPR 305/2011)
replaces the previous Construction Products Directive (CPD 89/106).
Edition MP-EN 4.0
Fire control panel FC2080:
● Housing (19", pedestal cabinet) FH2080-AA
● Processor unit (19", FC2080) FCC2002-A1
● CPU card (FC2080) FCC2004-A1
● Communication card (FC2080) FCC2005-A1
● Network module (SAFEDLINK, CC) FN2010-A1
● I/O card (remote transmission) FCI2007-A1
● Installation and wiring of key safe adapter [DE]
Fire control panel FC2060/FC2080:
● I/O card (horn/monitored) FCI2009-A1
● Power supply unit (150 W) Version A5
FG2020
● Link to the Technical Manual FG2020, A6V10281424
Revision of:
Power supply unit (150 W) Version A4
Third edition MP3.0
● Revision history redefined and standardized
● Installation of FN2008 and FN2009 revised (symmetry element removed)
● Integration of PMI & mainboard FCM2027
● Mounting of remote EVAC-NL revised
● Pin assignment for event printer FTO2001-A1
● Various minor changes
About this document
1
Revision history
13 | 354
008851_s_en_--
2016-01-27