I/O Modules Approved For Simotion - Siemens SIMOTION C230-2 Equipment Manual

Hide thumbs Also See for SIMOTION C230-2:

Table of Contents

Device Data

3.1.5

I/O modules approved for SIMOTION

Preferred peripherals for use with SIMOTION C:

S Centralized peripherals:

SIMATIC S7-300 I/O modules (only with SIMOTION C)

S Distributed I/O systems:

– SIMATIC ET 200M (distributed use of SIMATIC S7-300 I/O modules):

The modular I/O system for control cabinet installation and high channel

densities

– SIMATIC ET 200S:

Fine modular I/O system for control cabinet installation including motor start-

ers, safety technology and individual grouping of the load groups

– SIMATIC ET 200X:

The modular I/O system in the IP 65/67 degree of protection for use without

a control cabinet and in the machine's proximity; includes motor starters and

pneumatic modules as well as DESINA- and ECOFAST-conform modules

– SIMATIC ET 200eco:

The compact, economical I/O system in the IP 67 degree of protection for

use without a control cabinet and in the machine's proximity; with the flexible

and fast ECOFAST or M12 connection system

S Other PROFIBUS DP I/Os:

ADI 4 (Analog Drive Interface)

for connecting drives with a ± 10 V analog setpoint interface

Note

Please note that not all modules of the above-mentioned I/Os or I/O systems are

approved for SIMOTION. Additionally, system-related functional differences as

regards use with SIMOTION and SIMATIC may occur. For example, special pro-

cess-control functions (e.g. insertion and removal under voltage...) are not sup-

ported by SIMOTION for the ET 200M distributed I/O system.

A detailed, regularly updated list of the I/O modules approved for use with SIMO-

TION, as well as notes on their use, can be found on the Internet at:

http://www4.ad.siemens.de/view/cs/en/10805436

!...Motion Control System SIMOTION

! Supplementary system components

! FAQ (entry ID: 11886029)

3-30

SIMOTION C230-2, 04.2003 Edition

Table of Contents