Siemens SIMOTION C230-2 Equipment Manual page 65

Dimension drawing for mounting holes
Table 4-2 provides information on dimensions for the rail mounting holes.
Table 4-2 Mounting holes for mounting rails
"Standard" mounting rail
32.5 mm
57.2 mm
a
Mounting rail Distance a
length
160 mm 10 mm
482.6 mm 8.3 mm
530 mm 15 mm
830 mm 15 mm
Mounting screws
Choose one of the following types of screw to mount the mounting rail:
For
Outer mounting
screws
Additional mounting
screw
(2-meter mounting
rail only)
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
32.5 mm
57.2 mm
b
Distance b
140 mm
466 mm
500 mm
800 mm
You can use...
M6 cylindrical screw as per
ISO 1207/ISO 1580
(DIN 84/DIN 85)
M6 hexagonal screw as per
ISO 4017 (DIN 4017)
M6 cylindrical screw as per
ISO 1207/ISO 1580
(DIN 84/DIN 85)
2-meter mounting rail
Approx.
500 mm
15 mm
–
Select a screw length that is ap-
propriate to your configuration.
In addition, you require 6.4
washers as per
ISO 7092 (DIN 433).
Installation
Approx.
500 mm
Explanation
4-65