Siemens SIMOTION C230-2 Equipment Manual page 14

Product Overview
Components
The most important components of a SIMOTION application with C230-2 and their
functions are listed below.
Note
The modules or devices approved for the C230-2 can be found in the SIMOTION
PM 10 catalog.
Refer to the list of references for the order number of the catalog.
Centralized peripherals
Table 1-1
Component
C230-2
Power supply (PS)
Signal modules (SM)
Function modules (FM)
Communications proces-
sors (CP)
1-14
C230-2 with centralized peripherals
... is the motion control module. The C230-2 supplies the P-bus
with 5 V; communicates over the P-bus (backplane bus) with
the I/O modules.
You can use the C230-2's integrated fast digital inputs/outputs
as:
S
Homing inputs
S
Inputs for measuring inputs
S
User-addressable process inputs/outputs
Drive devices with "10 V analog interfaces can be connected
to the onboard drive interface.
Incremental encoders or absolute encoders can be connected
to the measuring system interface.
... converts the line voltage (120/230 VAC) into an operating
voltage of 24 VDC to supply the C230-2.
... adapt various process signal levels to the C230-2 (digital
input/output modules and analog input/output modules).
Note:
All approved modules are listed in the PM 10 catalog and in
Subsection 3.1.5.
...relieve the CPU of computation-intensive tasks, for example,
counting.
Note:
All approved modules are listed in the PM 10 catalog and in
Subsection 3.1.5.
... for data exchange
Note:
All approved modules are listed in the PM 10 catalog and in
Subsection 3.1.5.
Function
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition