Siemens SIMOTION C230-2 Equipment Manual page 113

Connecting the PG/PC to a C230-2
You can connect the PG/PC to the C230-2's PROFIBUS (connector X8 or X9) with
a connector cable (see Section 7.2).
Information on the cable lengths in each case for PROFIBUS DP can be found in
Subsection 7.1.3.
You can connect the PG/PC via a shielded twisted pair cable to the Ethernet of the
C230-2 (connector X7).
Information on wiring the Ethernet subnet 7.3.
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
Commissioning
8-113