Siemens SIMOTION C230-2 Equipment Manual page 15

Distributed I/Os
Table 1-2
Component
C230-2
Table 1-3
Component
Programming device
(PG/PC)
SIMATIC HMI device
Drive units
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
C230-2 with distributed I/Os
... is the motion control module.
S
The C230-2 communicates via two PROFIBUS DP inter-
faces with the:
– Programming device (PG/PC)
– SIMATIC HMI devices
– S7 controllers with PROFIBUS DP interface
– I/O systems ET 200
– Drive units
– Further C230-2s
S
The C230-2 communicates via an Ethernet interface with
the programming device (PG/PC).
Note:
All approved devicles are listed in the PM 10 catalog and in
Subsection 3.1.5.
Further components that can be connected to the C230-2
... configures, parameterizes, programs and tests SIMOTION
and C230-2.
... is used for operating and monitoring functions. It is not abso-
lutely essential for the operation of a C230-2.
Note:
All released modules are listed in the PM 10 catalog.
... convert speed setpoints into signals for controlling the motor
and provide the power required to operate the motors.
Note:
All released modules are listed in the PM 10 catalog.
Product Overview
Function
Function
1-15