Product Overview - Siemens SIMOTION C230-2 Equipment Manual

Preface
Sections of information in the manual
The following list describes the purpose of this manual and how you can benefit
from it.
S Product Overview (Chapter 1)
This part explains the purpose and potential applications of the module.
S The Fundamentals of Motion Control (Chapter 2)
Here you will find an introduction to motion control for individual axes and axis
groupings. The various terms are also explained.
S Device Data (Chapter 3)
This part introduces the C230-2 and its functions.
S Installation (Chapter 4)
This part explains the design of the mechanical configuration and how to install
the SIMOTION C230-2 components.
S Addressing the I/O (Chapter 5)
This part contains the information you will require to define the module initial
addresses of the modules used.
S Wiring (Chapter 6)
This part describes the connection and wiring for the drives, encoders and digi-
tal inputs/outputs (onboard).
S Networking (Chapter 7)
This part contains information that you need in order to create a PROFIBUS
subnet or Ethernet subnet.
S Commissioning (Chapter 8)
This part describes how you commission the hardware components and what
you must take into account.
S Maintenance (Chapter 9)
This part describes how you replace the module and update the SIMOTION
kernel.
S Appendices with factual information for reference (e.g. standards and approv-
als, ESD etc.)
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
Preface-3