Siemens SIMOTION C230-2 Equipment Manual page 122

Hide thumbs Also See for SIMOTION C230-2:

Table of Contents

Commissioning

Note

You can also operate the C230-2 without a Micro Memory Card. The SIMOTION

Kernel is in the "Non-volatile system" of the C230-2 and you can load the technol-

ogy packages and user data from the Engineering System to the C230-2.

When the power supply is turned off, the contents of the "Volatile data" area are

lost.

When the power supply is switched on, the following data is still present on the

C230-2:

SIMOTION Kernel

Data in the "Non-volatile data" area

– Diagnostics buffer

– Baud rate

– PROFIBUS DP addresses of the C230-2

– IP address, subnet dialog box and router address of the C230-2

– Retain variables

The technology packages and user data (configuration, programs, parameteriza-

tions) have to be loaded either from the Engineering System or a Micro Memory

Card.

You can find further information about the Engineering System in the SIMOTION

SCOUT Operating Instructions, refer to the List of References for the order num-

ber.

8-122

SIMOTION C230-2, 04.2003 Edition

Table of Contents