Product Overview - Siemens Stratos Outstation General, Installation, Commissioning & Maintenance Handbook

2.3

Product Overview

The Stratos Outstation provides control and monitoring of traffic controllers and other on-
street equipment. The outstation provides an Ethernet port for IP connectivity to an
instation.
The controller interface can be semi-integral, where the data is transferred via RS232, or
freestanding, where the interface is via individual I/O relay contacts or a combination of
the two. The interface summary for each controller type is given in the following table:-
Supplier
Siemens
Microsense /
Telent
Peek
Motus
* See section 5.6 for cables and baud rates.
#
ESP = Enhanced Serial Port, binary message protocol
†
Supported at time of writing. Controller monitoring packages can be updated independently of the
main outstation firmware.
∞ ST950 includes its own integrated Controller Monitor package.
Table 1 – Outstation / Controller Interface Summary Table
The semi-integral and freestanding interfaces are described in the sections below.
Security classification Unrestricted
Version 3
Last Editor Alan Doyle
Document Name Stratos Outstation General and ICM Handbook
Copyright © Siemens plc 2014. All Rights Reserved.
Controller RS232
Protocol *
#
ST950 ESP
#
ST900 ESP
#
ST800 ESP
#
ST750 ESP
#
ST700 ESP
T400 ASCII-7bit
T500 ASCII-7bit
MPC ASCII-7bit
MTC ASCII-7bit
Sentinel ASCII-7bit
Optima ASCII-7bit
TSC3 ASCII-7bit
TRX ASCII-7bit
PTC-1 ASCII-7bit
TSP ASCII-7bit
TM150 ASCII-7bit
TM150 2P ASCII-7bit
Mobility and Logistics is a division of Siemens Plc
Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Controller Interfac
†
∞
Monitoring e type
Semi-
P
integral
P
see
P
2.3.1
P
P
Free
Standin
g see
2.3.2
and
2.3.3
P
P
Page
Status
Date
Document No.
13 of 92
Issued
05-Oct-2017
667/HB/52250/000