Using A Polycom Realpresence Group Series Remote Control - Polycom RealPresence Group Series User Manual

Using a Polycom RealPresence Group
Series Remote Control
The infrared RealPresence Group Series remote control allows you to operate a RealPresence Group
Series system.
This includes placing calls, adjusting the volume, zooming the camera, navigating screens, and more.
RealPresence Group Series systems and EagleEye cameras have infrared receivers. You can control your
RealPresence Group Series system by pointing the remote control toward a RealPresence Group Series
system or a connected EagleEye camera.
You might need a special cable to connect an SDI camera to the system to receive infrared signals from the
remote control. For more information about the cable, contact Polycom support.
This section includes the following topics:
● "Remote Control Buttons and Descriptions" on page 6
● "Contacts" on page 7
● "Calling" on page 9
● "Content" on page 15
● "Recording Calls" on page 20
● "Settings" on page 23
● "Troubleshooting" on page 33
Polycom, Inc. 5