Record Calls With Realpresence Media Suite; Stop Recording; Playback A Recording - Polycom RealPresence Group Series User Manual

RealPresence Media Suite Touch Tones
You can use enter touch tones with the touch interface, a touch device, or remote control to manage the call
recording.
The supported touch tone codes for activating the button controls on the TVUI are listed in this table.
TVUI State
Menu display state
Video playback state

Record Calls with RealPresence Media Suite

When you establish a connection to a RealPresence Media Suite, the recording starts and the TVUI displays
in a call window. Unless the administrator for the RealPresence Media Suite has disabled the Start
Recording Immediately option, the recording starts immediately after the TVUI displays.
You can use either the touch monitors or the remote control to dial into RealPresence Media Suite and
activate the TVUI.
T
ASK
1 Enter the IP, H.323, or SIP address of the Media Suite.
The TVUI displays in the call window.
2 If the recording does not start immediately, do one of the following to start recording:
 Press *2 on the remote control.
 Tap
to open the Quick Access menu then tap
the onscreen dial pad.

Stop Recording

Before ending a call, make sure to stop the recording.
» Do one of the following:
 Press *3 on the remote control.
 Tap
to open the Quick Access menu, tap
onscreen dial pad.
Polycom, Inc.
Operation
Pause recording
Start a recording
Resume a paused recording
Stop a recording

Playback a recording

Pause the video
Start the video
Resume a paused video
Stop a playback and return to the main menu
Reverse a video
Fast forward a video
Using the Touch User Interface
Touch Tone Code
*1
*2
*3
*5
*1
*2
*3
*4
*6
More > Touch Tones and enter *2 on
More > Touch Tones, and enter *3 on the
51