Move The Camera To A Stored Preset - Polycom RealPresence Group Series User Manual

3 Touch Select Camera to choose a camera or other video source.
4 Touch Control Camera to move the camera to the desired position.
5 Touch View Presets, then touch and hold a number to store the preset position.
Any existing preset stored at the number you select is replaced.

Move the Camera to a Stored Preset

After you have your presets stored, move the camera to one of the stored presets.
T
ASK
1 From the Home screen or Call screen, touch
2 If you are in a call, touch
3 Touch View Presets.
Icons for presets 0-9 are shown on the screen.
4 Touch a number to go to a saved preset.
Polycom, Inc.
Cameras.
Cameras > Near or Far to select either near-end or far-end control.
Using a Polycom Touch Control Device
98