Share Content From A Connected Computer; Stop Sharing Content From A Connected Computer - Polycom RealPresence Group Series User Manual

Share Content from a Connected Computer

Before you show content, check that the computer video output is configured to use one of these supported
resolutions and refresh rates.
For best video quality, use refresh rates of 60 Hz or less.
Resolution
800 x 600
1024 x 768
1280 x 720
1280 x 768
1280 x 1024
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
Note: The way you set the resolution and refresh rate differs, depending on the type of operating system
you have. Check your computer manual or help topics for the appropriate steps.
T
ASK
1 From the Home screen or Call screen, touch Show Content.
2 Touch the video source to start showing content.
Keep the following in mind points:
 Audio from the content input is muted unless the content input is selected as a video source.
 To send analog content, disconnect both digital and analog inputs, wait 15 seconds, then connect
only the analog input.
 If both digital and analog inputs are connected, only the digital content is sent.

Stop Sharing Content from a Connected Computer

You can use the Touch Control to stop showing the content you are sharing from a computer connected to
a RealPresence Group system.
T
ASK
1 From the Content screen of the Touch Control, touch the computer source to stop showing it.
2 Using your remote control, select
Laptop.
Polycom, Inc.
Refresh rates (Hz)
56, 60, 72, 75, 85
60, 70, 75, 85
50, 60
60
60, 75
60
60
60
60
> Hide and the name of your content source, such as Hide
Using a Polycom Touch Control Device
88