Download And Install People+Content Ip; Share Content With People+Content Ip; Stop Sharing Content With People+Content Ip; Share Content From A Usb Drive - Polycom RealPresence Group Series User Manual

Download and Install People+Content IP

You need to download and install the People+Content IP application on a computer before you can use it
to show content.
T
ASK
1 On a computer, go to the Polycom People+Content IP page.
2 Under Resources, download the People+Content IP software for Mac or PC.
3 Extract the contents of the .zip file and launch the installer. Follow the instructions in the installation
wizard.

Share Content with People+Content IP

People+Content IP allows you to send content from a computer that is connected directly to a Polycom
Touch Control.
T
ASK
1 Using the USB content cable, connect the computer directly to the underside of the Touch Control.
If autorun is enabled on the computer, you are prompted to run People+Content IP. If autorun is
disabled on your computer, People+Content IP shows up as an external drive, and you must navigate
to My Computer to launch it manually.
2 Launch People+Content IP.
3 In People+Content IP, open the content you want to show and click
4 To stop showing content, click

Stop Sharing Content with People+Content IP

When you are done showing content, shut down People+Content IP.
» Click in the People+Content IP application.

Share Content from a USB Drive

A Polycom Touch Control can show content stored on a USB drive.
T
ASK
1 Connect the USB device to the USB port on the right side of the Polycom Touch Control.
Polycom, Inc.
.
Using a Polycom Touch Control Device
.
89