Show Content From A Computer Connected To Realpresence Group System; Polycom People+Content Ip - Polycom RealPresence Group Series User Manual

Show Content from a Computer Connected to RealPresence Group
System
Before you show content, check that the computer video output is configured to use one of these supported
resolutions and refresh rates.
For best video quality, use refresh rates of 60 Hz or less.
Resolution
800 x 600
1024 x 768
1280 x 720
1280 x 768
1280 x 1024
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
Note: The way you set the resolution and refresh rate differs, depending on the type of operating system
you have. Check your computer's manual or help topics for the appropriate steps.
To start showing content from a source connected to a RealPresence Group system:
» Using your remote control, select
While in a call, you can press
source.

Polycom People+Content IP

The People+Content IP application allows you to send content from a computer that is not connected
directly to the RealPresence Group system or Polycom touch devices.
Keep the following points in mind about People+Content IP:
● People+Content IP provides video-only content. No audio is shared.
● People+Content IP supports any computer desktop resolution with color set to 16-bit or higher.
● Your computer resolution can be set to anything, but People+Content IP scales the image to
1024x768 or 1280x720.
Note: For a computer connected directly to the RealPresence Group system, Polycom recommends
using the Send Computer button or Content button instead of People+Content IP.
Polycom, Inc.
Using a Polycom RealPresence Group Series Remote Control
Refresh rates (Hz)
56, 60, 72, 75, 85
60, 70, 75, 85
50, 60
60
60, 75
60
60
60
60
and then select your content source from the list.
> Select on your remote to turn on and off the last used content
18