Inspection - Suzuki RM-Z250 Service Manual

• Adjust the spring set length and tighten the lock-nut.
 Standard spring set length:
4.2 mm (0.17 in) compressed from the free length
Spring set length adjustable range:
248 – 263 mm (9.76 – 10.35 in)
[at spring free length 265 mm (10.43 in)]
a: Hardest spring setting
b: Softest spring setting
 Spring adjuster lock-nut: 44 N·m (4.4 kgf-m, 32.0 lbf-ft)

INSPECTION

• Inspect the rear shock absorber for oil leakage.
• Inspect the damper rod for bends and smooth movement.
• Inspect the bump rubber for deterioration and damage.
• Inspect the damper rod hidden by the bump rubber by moving
the bump rubber.
• If necessary, replace the defective parts with a new one.
• Inspect the spacers and dust seals for damage.
• Inspect the bearing for excessive play and smooth movement.
• If necessary, replace the defective parts with a new one.
REAR SUSPENSION 19-5