Intake Pipe Removal; Intake Pipe Installation - Suzuki RM-Z250 Service Manual

Hide thumbs Also See for RM-Z250:

Table of Contents

6-20 CYLINDER HEAD, CYLINDER AND PISTON

INTAKE PIPE REMOVAL

• Remove the intake pipe clamp 1.

• Remove intake pipe 3 by removing its bolts 2.

• Apply grease to O-ring of the intake pipe.

 99000-25010: SUZUKI SUPER GREASE "A"

• Install the intake pipe 1 and tighten the intake pipe bolts 2 to

the specified torque.

Make sure that the "UP" mark A faces up.

Intake pipe bolt: 10 N·m (1.0 kgf-m, 7.0 Ibf-ft)

or equivalent

Table of Contents