Radiator; Inspection - Suzuki RM-Z250 Service Manual

Hide thumbs Also See for RM-Z250:

Table of Contents

RADIATOR

• Visually inspect the radiators and hose for damage.

• Fins bent down or dented can be repaired by straightening

them with the blade of a small screwdriver.

RADIATOR CAP

• Fit the cap to the radiator cap tester.

• Build up pressure slowly by operating the tester. Make sure

that the pressure build-up stops at 95 – 125 kPa (0.95 – 1.25

, 14 – 18 psi) and that, with the tester held standstill,

the cap is capable of holding that pressure for at least 10 sec-

• Replace the cap if it is found not to satisfy either of these two

requirements.

 Radiator cap valve release pressure

Standard: 95 – 125 kPa

(0.95 – 1.25 kgf/cm

, 14 – 18 psi)

COOLING SYSTEM 14-5

Table of Contents