Cylinder Head And Valve Inspection - Suzuki RM-Z250 Service Manual
Hide thumbs
Also See for RM-Z250:
- Owner's manual (219 pages) ,
- Owner's service manual (329 pages) ,
- Owner's service manual (344 pages)
Table of Contents
Advertisement
6-12 CYLINDER HEAD, CYLINDER AND PISTON
CYLINDER HEAD AND VALVE INSPECTION
VALVE DISASSEMBLY
• Remove the tappet 1 and shim 2 by fingers or magnetic
hand.
Identify the position of each removed part.
(Intake side)
• Install the sleeve protector a between the valve spring and
cylinder head.
• Using the special tools, compress the valve spring and
remove the two cotter halves 3 from the valve stem.
To prevent damage of the tappet sliding surface with
the special tool, use the sleeve protector a.
09916-14510: Valve lifter
09916-14522: Valve lifter attachment
09916-84511: Tweezer
09919-28620: Sleeve protector
(Exhaust side)
• Install the sleeve protector b between the valve spring and
cylinder head.
• Using the special tools, compress the valve spring and
remove the two cotter halves 3 from the valve stem.
To prevent damage of the tappet sliding surface with
the special tool, use the sleeve protector b.
09916-14510: Valve lifter
09916-14530: Valve lifter attachment
09916-84511: Tweezer
09919-28610: Sleeve protector
• Remove the valve spring retainer 4 and valve spring 5.
Advertisement
Chapters
Table of Contents
Troubleshooting
