Bearing Inspection - Suzuki RM-Z250 Service Manual

10-10 TRANSMISSION AND CRANKSHAFT
• Install each new oil seal (1, 2, 3, 5) with the special tool.
NOTE:
After installing the crankshaft, install the oil seal 4 with special
tool. (10-13, -14)
 09913-70210: Bearing installer set (10 – 75 )
Oil seal 1, 5:  40 Attachment
Oil seal 2:  22 Attachment
Oil seal 3:  17 Attachment
• Apply grease to each oil seal lip.
 99000-25010: SUZUKI SUPER GREASE "A"
NOTE:
Be sure to check the direction of the crankshaft bearing oil seal
5 before installing them.

BEARING INSPECTION

• Inspect the bearings 1 for play, discoloration, wear and sei-
zure.
• Move the inner race by finger and inspect for smooth move-
ment.
• If it does not move smoothly, replace the bearing with a new
one.
or equivalent
A Primary drive gear side