Clutch Release Camshaft; Removal; Inspection - Suzuki RM-Z250 Service Manual

Hide thumbs Also See for RM-Z250:

Table of Contents

CLUTCH RELEASE CAMSHAFT

• Remove the clutch cover and its gasket. (7-3)

• Remove the pressure plate and push rod. (7-3)

• Remove the retainer 2 by removing its bolt 1.

• Disconnect the clutch cable 3.

• Pull the clutch release camshaft 4 out of crankcase.

CLUTCH RELEASE CAMSHAFT

• Inspect the clutch release camshaft for abnormal deflection

• If any defects are found, replace the release camshaft with a

OIL SEAL AND BEARING

• Inspect the oil seal 1 for oil leakage and oil seal lip damage.

• Inspect the bearings 2 for play and smooth movement.

• If necessary, replace the defective parts with a new one.

(10-9 to -12)

Table of Contents