Clutch Plate; Removal - Suzuki RM-Z250 Service Manual

Hide thumbs Also See for RM-Z250:

Table of Contents

CLUTCH PLATE

• Drain engine oil. (2-13)

• Remove the brake pedal. (17-20)

• Remove the clutch cover 1 and its gasket 2.

• Remove the clutch spring set bolts 3 and clutch springs.

Loosen the clutch spring set bolts 3 little by little and diagonally.

• Remove the clutch pressure plate 4, washer 5 bearing 6

and push piece 7.

• Remove the push rod 8.

If it is difficult to pull out the push rod 8, use a magnetic hand or

Table of Contents