View Process Variables; View Process Variables And Other Data Using Prolink Iii; View Process Variables Using The Field Communicator; View Transmitter Status Using The Status Led - Emerson Micro Motion 2500 Configuration And Use Manual

Transmitter operation
9.2

View process variables

ProLink III
Field Communicator Overview > Shortcuts > Variables > Process Variables
Overview
Process variables provide information about the state of the process fluid, such as flow
rate, density, and temperature, as well as running totals. Process variables can also provide
data about flowmeter operation, such as drive gain and pickoff voltage. This information
can be used to understand and troubleshoot your process.
9.2.1

View process variables and other data using ProLink III

Monitor process variables, diagnostic variables, and other data to maintain process quality.
ProLink III automatically displays process variables, diagnostic variables, and other data on
the main screen.
Tip
ProLink III allows you to choose the process variables that appear on the main screen. You can also
choose whether to view data in Analog Gauge view or digital view, and you can customize the gauge
settings. For more information, see the ProLink III user manual.
9.2.2

View process variables using the Field Communicator

Monitor process variables to maintain process quality.
•
•
9.3

View transmitter status using the status LED

The status LED shows the current alert condition of the transmitter.
Observe the status LED.
To interpret the status LED, see the following table.
Table 9-1:
LED state
Solid green
126
View the desired variable on the main screen under Process Variables. See
for more information.
To view current values of basic process variables, choose Overview.
To view a more complete set of process variables, plus the current state of the
outputs, choose Service Tools > Variables.
Status LED states
Alarm condition
No alarm
Micro Motion Model 2500 Transmitters with Configurable Input/Outputs
Description
Normal operation
Section 9.2.1