Table 10-3:
Transmitter outputs and process data when Approvals=NTEP
Function
Frequency output behavior Inactive (produces no pulses), even under fault
Discrete output behavior
Process variables All flow rates
Density
Temperature
Totalizers
Values
Inventories
Values
Table 10-4:
Transmitter outputs and process data when Approvals=OIML
Function
Outputs
mA output behavior
Frequency output behavior
Discrete output behavior
Process variables
All flow rates
Density
Temperature
Totalizers
Values
Inventories
Values
10.1.3
Effect of the Weights & Measures application on
operation and maintenance functions
When the Weights & Measures application is installed, specific operations and
maintenance activities may be disallowed. You can switch to unsecured mode, perform
the required actions, then switch back to secured mode.
Configuration and Use Manual
Operate the transmitter with the Weights & Measures application
Transmitter status
Unsecured
conditions
Normal
Reported as zero
Reported normally
Reported normally
Do not increment or decrement
Do not increment or decrement
Unsecured
Performs configured fault action
Performs configured fault action
Performs configured fault action
Reported normally
Reported normally
Reported normally
Do not increment or decrement
Do not increment or decrement
(continued)
Secured
Normal
Normal
Reported normally
Reported normally
Reported normally
Increment normally
Increment normally
Transmitter status
Secured
Normal
Normal
Normal
Reported normally
Reported normally
Reported normally
Increment normally
Increment normally
135