Use Smart Meter Verification (Smv); Smv Requirements; Smv Test Preparation - Emerson Micro Motion 1500 Configuration And Use Manual

Measurement support
9.2

Use Smart Meter Verification (SMV)

You can run an SMV test, view and interpret the results, and set up automatic execution.
9.2.1

SMV requirements

To use SMV, the transmitter must be paired with an enhanced core processor.
See Table 9‐1
communication tool needed to support SMV.
Table 9-1:
Item
Transmitter
Enhanced core processor
ProLink III
Field Communicator
If your devices or tools do not meet the minimum version requirements for SMV, you still
may have access to an older version of meter verification if the option was ordered for your
transmitter. See
meter verification and the newer SMV.
Table 9-2:
Feature
Measurement inter-
ruption
Result storage
Results reporting
Test start methods
(1) Detailed test analyses such as comparison graphs are not available on the local display.
9.2.2

SMV test preparation

Although it is not necessary to match factory conditions or change the transmitter's
configuration during an SMV test, the test will run more smoothly when conditions are
stable.
104
for the minimum version of the transmitter, enhanced core processor, and
Minimum SMV version
Minimum version (legacy)
6.0
3.6
1.0
HART device description: de-
vice rev 6, DD rev 2
Table 9‐2 for a description of the major differences between the older
Major differences between meter verification and SMV
Meter verification (older)
Suspended during the test (3 mi-
nutes)
No results stored in the transmitter
Pass/fail/abort
Manual only
Micro Motion Model 1500 Transmitters with Analog Outputs
Minimum basic SMV trans-
mitter
8.0
4.4
4.0
HART device description: de-
vice rev 8, DD rev 1
SMV (newer)
No interruption necessary
Last 20 results stored in the trans-
mitter (licensed SMV)
Pass/fail/abort comparison tables
and graphs for stored test results
Manual, scheduled, event-based
(1)