View Alerts Using The Field Communicator; Alert Data In Transmitter Memory - Emerson Micro Motion 1500 Configuration And Use Manual

Transmitter operation
Postrequisites
•
•
Related information
8.4.2

View alerts using the Field Communicator

You can view a list containing all alerts that are active, or inactive but unacknowledged.
•
•
Related information
8.4.3

Alert data in transmitter memory

The transmitter maintains three sets of data for every alert that is posted.
For each alert occurrence, the following three sets of data are maintained in transmitter
memory:
•
•
•
Alert data structure Contents
Alert List As determined by the alert status bits, a list of:
•
•
98
To clear the following alerts, you must correct the problem, acknowledge the alert,
then power-cycle the transmitter: A001, A002, A010, A011, A012, A013, A018,
A019, A022, A023, A024, A025, A028, A029, A031.
For all other alerts:
- If the alert is inactive when it is acknowledged, it will be removed from the list.
- If the alert is active when it is acknowledged, it will be removed from the list
when the alert condition clears.
Alert data in transmitter memory
To view active or unacknowledged alerts, choose Service Tools > Alerts.
All active alerts and unacknowledged alerts are listed.
Note
Only Fault and Informational alerts are listed. The transmitter automatically filters out alerts
with Status Alert Severity set to Ignore.
To refresh the list, choose Service Tools > Alerts > Refresh Alerts.
Alert data in transmitter memory
Alert List
Alert Statistics
Recent Alerts
Transmitter action if condition occurs
All currently active alerts
All previously active alerts that have not
been acknowledged
Clearing
Cleared and regenerated with every transmit-
ter power cycle
Micro Motion Model 1500 Transmitters with Analog Outputs