Icom IC-9700 Advanced Manual page 131

10. D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list
D Entering new information into the repeater list
Step 14. Selecting the repeater tone frequency
L When Step 2. Selecting the communication type is
set to "DV Repeater" or "DV Simplex," this item is not
displayed.
L This setting is required when Step 13. Setting the tone
is set to "TONE" or "TSQL."
1. Touch "REPEATER TONE."
2. Set the repeater tone frequency, then touch
[ENT].
3. Push .
EXIT
Step 15. Selecting the position data accuracy level
L When the Near Repeater Search function is not used, or
the distance between your position and a repeater is not
needed, select "OFF," and go to Step 18. Setting the
UTC offset.
1. Touch "POSITION."
2. Touch the position data accuracy level.
• None: Select when the repeater has no
position data.
• Approximate: Select when the entered position data is
approximately correct.
• Exact: Select when the entered position data is
exactly correct.
Step 16. Entering the latitude
L This item is displayed only when Step 15. Selecting the
position data accuracy level is set to "Approximate" or
"Exact."
1. Touch "LATITUDE."
2. Enter the latitude.
L To enter a north latitude, select "N," and to enter a
south latitude, select "S."
3. After entering, touch [ENT].
Step 17. Entering the longitude
L This item is displayed only when Step 15. Selecting the
position data accuracy level is set to "Approximate" or
"Exact."
1. Touch "LONGITUDE."
2. Enter the longitude.
L To enter an east latitude longitude, select "E," and to
enter a west longitude, select "W."
3. After entering, touch [ENT].
Step 18. Setting the UTC offset
L Universal Time Coordinated (UTC) offset is the time
difference between UTC and repeater local time. This is
a useful function to know the local time of the destination
repeater before you make a call.
1. Touch "UTC OFFSET."
2. Set the time difference between UTC and the
local time, then push [ENT].
3. Push .
EXIT
Step 19. Saving the repeater list
1. Touch "<<Add Write>>."
• The confirmation dialog is displayed.
2. Touch <YES>.
• The entered contents are saved in the repeater list, and
the display returns to the selected repeater group screen.
TIP: To cancel the entered data
1. Push to display the "Cancel edit?"
EXIT
window.
2. Touch <YES>.
• Cancels entry and returns to the selected repeater
group screen.
10-29