Scan Set Screen - Icom IC-9700 Advanced Manual

5. SCANS

SCAN SET screen

1. Display the SCAN screen.
» SCAN
MENU
2. Touch [SET].
3. Touch an item to set. (Example: SCAN Speed)
4. Touch an option. (Example: Slow)
5. To close the SCAN SET screen, push
SCAN Speed
Set the desired scan speed to slow or fast.
• Slow: Scan speed is slow.
• Fast: Scan speed is fast.
SCAN Resume
Set the Scan Resume function to ON or OFF.
• OFF: When a signal is detected, cancels the scan.
• ON: When a signal is detected, the scan pauses
for 10 seconds, then resumes.
Two seconds after the signal disappears, the
scan resumes.
TIP: How to reset to the default settings
Touching an item or its option for 1 second displays
the Quick menu, and then touch "Default" to reset
to the default setting.
Pause Timer
When Scan Resume is ON, select the Scan Pause
Timer. When receiving a signal, the scan pauses for
this set period of time.
• 2 ~ 20sec:
• HOLD:
Resume Timer
Select the scan Resume Timer. When a received
signal disappears, the scan resumes after this set
period of time passed.
• 0sec:
• 1 ~ 5sec: The scan resumes 1 ~ 5 seconds after the
• HOLD:
Temporary Skip Timer
Set the Temporary Skip Timer. The unwanted
frequencies that are set as Skip channels (PSKIP or
SKIP) are skipped for this set period of time during a
scan.
.
EXIT
L This timer is activated for the VFO scan, Memory scan,
and DR scan.
• 5min/10min/15min:
• While Scanning:
(Default: Fast)
• While Powered ON:
(Default: ON)
5-3
When a signal is received, the scan
pauses for 2 ~ 20 seconds (in 2
second steps).
The scan pauses on a received
signal until the signal disappears.
The scan resumes immediately after the
signal disappears.
signal disappears.
The scan remains paused for the
Pause Timer setting, even if the signal
disappears.
Skip channels are skipped
for the set period of time.
Skip channels are skipped
until the Scan is stopped.
Skip channels are skipped
until the receiver power is
turned OFF.
(Default: 10sec)
(Default: 2sec)
(Default: 5min)