Manually Input The Position Data - Icom IC-9700 Advanced Manual

7. GPS OPERATION (BASIC)

Manually input the position data

1. Manually input
1. Display the "MANUAL POSITION" screen.
» GPS > GPS Set > Manual Position
MENU
2. Push .
QUICK
3. Touch [EDIT].
4. Touch [LATITUDE].
5. Enter the Latitude, and then touch [ENT].
6. Enter the Longitude in the same way.
7. Touch [<<Write>>].
8. Touch [YES].
9. To close the MANUAL POSITION screen, push
.
EXIT
TIP:
In Step 3, touch [Capture From GPS] to manually
update your position with the received GPS data.
2. Set the "GPS Select" to "Manual"
1. Display the "GPS SELECT" screen.
» GPS > GPS Set > GPS Select
MENU
2. Touch [Manual].
• The manually entered position data is set as your
station's position.
3. To close the MANUAL POSITION screen, push
several times.
EXIT
7-2