Icom IC-9700 Advanced Manual page 81

8. GPS OPERATION (ADVANCED)
GPS SET
» GPS > GPS TX Mode > D-PRS >
MENU
TX Format > Item
Comment
Enter a comment.
The number of characters you can enter differs,
depending on the Data Extension and Altitude data
entry.
Data Extension
OFF
OFF
Course/Speed
Course/Speed
Power/Height/Gain/Directivity
Power/Height/Gain/Directivity
The symbol " " displays the transmittable comment
range. Please note that the characters that exceed
the range will not be transmitted.
Transmittable comment range display
(In case of up to 28 characters)
Position
(Default: LATITUDE: 0º00'00"N,
LONGITUDE: 0º00'00"E, ALTITUDE: ------ft)
Displays the position information of the Item.
Push to open the window shown below.
QUICK
TIP: When you select "Capture From GPS" or "Set
From GPS Memory," you can capture the position
from the GPS, or set the Object's position from the
GPS memory.
L See "Entering the position information manually"
(p. 8-32) for details.
Characters
Altitude entered
(maximum)
— 43 (Default)
Entered 35
— 36
Entered 28
— 36
Entered 28
Data Extension
Select whether or not to transmit the Course/Speed
data or Power/Height/Gain/Directivity data along with
the position data in the D-PRS mode.
L The number of characters you can enter in "Comment"
differs, depending on the "Altitude" and "Data Extension"
settings.
• OFF:
• Course/Speed: Transmits the course and speed
• Power/Height/Gain/Directivity:
Course
Set the Item's course to between 0º and 360º.
L This item is displayed when "Data Extension" is set to
"Course/Speed."
Speed
Set the Item's speed to between 0 and 1150 mph.*
* If the Speed unit is set to "km/h," select between 0 to 1850
km/h, or set to "knots," select between 0 and 999 knot.
L This item is displayed when "Data Extension" is set to
"Course/Speed."
Power
Select the TX power level of Item, to transmit along
with the position data.
L This item is displayed when "Data Extension" is set to
"Power/Height/Gain/Directivity."
Options: Set to between 0, 1, 4, 9, 16, 25, 36, 49, 64,
and 81 W.
Height
Select the height of the Item's antenna, to transmit
along with the position data.
L This item is displayed when "Data Extension" is set to
"Power/Height/Gain/Directivity."
Options: Set to between 10, 20, 40, 80, 160, 320,
640, 1280, 2560, and 5120 feet.*
* If the Altitude/Distance unit is set to "m," select between 3,
6, 12, 24, 49, 98, 195, 390, 780, and 1561 meters.
8-34
(Default: OFF)
Does not transmit any information.
data with the position data.
L The course and speed data is not
transmitted when your position is
manually set.
Transmits the TX power level,
Height, Gain and Directivity data,
along with the position data.
L The Power, Height, Gain and
Directivity data is transmitted even if
your location is manually set.
(Default: 0º)
(Default: 0mph)
(Default: 0W)
(Default: 10ft)