Checking The Hoses And Hose Connections - Infors HT Labfors 5 Operating Manual

Labfors 5 – Version for Microorganisms
Before Fermentation/Cultivation

8.2.15 Checking the Hoses and Hose Connections

Page 148 of 205
A detailed description on the calibration can be found in the sepa-
rate operating manual of the touch screen software.
Check and ensure the following items before each cultivation:
Hoses show no kinks and are not able to kink.

Hoses are undamaged and show no weaknesses.

Gas hoses and connections do not show any leaks.

Hose lines are as short as possible.

Hoses are secured with cable ties and/or hose clamps.

Only the pressure hoses supplied by the equipment manufac-

turer are connected as supply lines (water, gas) between the
in-house connections and the equipment.
22 January 2019