Preparing The Super Safe Sampler - Infors HT Labfors 5 Operating Manual

8.1.18 Preparing the Super Safe Sampler

Procedure
22 January 2019
Before Fermentation/Cultivation
INFORMATION
The following figures are for general purposes of comprehen-
sion.
In order to prepare the Super Safe Sampler sampling system for
autoclaving, proceed as follows:
1. Attach the hose of the valve group on the dip tube.
2. Secure the hose with a cable tie.
3.
Tighten the sample valve carefully by hand in a clockwise di-
rection.
This ensures that the non-return valve/sample valve screw
connection is tight.
Labfors 5 – Version for Microorganisms
Page 127 of 205