Main Menu - Delta Modulon DPH Series User Manual

8
UPS-1.1
Power Flow
Power Flow
Summary
System Status
EMS
After the Manual Bypass Switch (Q3) is turned on, the UPS will be switched to Manual
Bypass mode and the screen above will appear. Before maintenance, the UPS must be
switched to this mode and you must ensure that the input breaker (Q1), bypass breaker
(Q2) and external battery cabinet's breaker (Q5) are turned OFF. After that, the LCD will
AC source, the loads will lose power. Please refer to
7.7

Main Menu

There are three main menu icons
UPS-1.1
Power Flow
Power Flow
Summary
System Status
EMS
MEASUREMENT SETUP
POWER FLOW
Maintenance
Bypass
Bypass
Mains
90 %
5 mins
.
MEASUREMENT SETUP
POWER FLOW
Maintenance
Bypass
Bypass
Mains
90 %
5 mins
MAINTENANCE LOG IN WARNING
Administrator
, and
MEASUREMENT SETUP
MAINTENANCE
MAINTENANCE LOG IN EVENT LOG
Administrator
7-17
7 LCD Display & Settings
10:15
2
Sep 25,2018
Bypass
Load
30 %
, and their positions are shown
10:15
Sep 25,2018
On-Line
Load
30 %