C445 Module Assembly; Figure 17. Component Exploded View (C445B; Figure 18. Option Cover Removal - Eaton Power Xpert C445 User Manual

Chapter 3—Installation and Wiring

C445 Module Assembly

Note: Power down the C445 before adding or removing option cards or RTC module.
Figure 17. Component Exploded View (C445B...Base Module, C445M...Measurement Module, Accessory Cover,
C445XO-TRTC Real Time Clock Module, C445C... Communications card(s))

Figure 18. Option Cover Removal

Do not remove or install modules while the device is powered.
Remove the blank cover on the base control module to install the Memory/RTC
(C445XO-RTC) Module and/or Communication Card (C445XC...).
If installing only the Memory/RTC module, put the blank cover back in place.
If installing a Communication Card, the blank cover can be discarded.
1
2
16 Power Xpert C445 Global Motor Management Relay MN042003EN—October 2016 www.eaton.com