Chapter 4—System Configuration and Commissioning
RTC Module—Fault Snapshot
The C445 module saves and time stamps critical application data for the most recent fault,
per the figure below.
This information may be accessed from the Power Xpert inControl Software Tool.
If the Base Control Module includes a real time clock board then time stamping will be in
UNIX format (day of week–month–day of month–time HH:MM:SS–time zone–year).
If a real time clock board is not present then time stamping will use the number of seconds
that have elapsed since the Base Control Module started up.
56
Power Xpert C445 Global Motor Management Relay MN042003EN—October 2016 www.eaton.com