Eaton Power Xpert C445 User Manual page 302

Table 127. C445 Modbus Register Map, continued
Register Name
1302 Snap Shot Day
1303 Snap Shot Hour
1304 Snap Shot Minute
1305 Snap Shot Second
1306 Snap Shot Trip Reason
Attribute
UINT8 RO
Default: 0
Backup Mem
UINT8 RO
Default: 0
Backup Mem
UINT8 RO
Default: 0
Backup Mem
UINT8 RO
Default: 0
Backup Mem
UINT16 RO
Default: 0
Enum
Backup Mem
Power Xpert C445 Global Motor Management Relay MN042003EN—October 2016 www.eaton.com
Appendix D—Modbus Register Map
Description
Fault Snap Shot Log Day. The Day from the time stamp information when
the last fault occurred.
Fault Snap Shot Log Hour. The Hour from the time stamp information
when the last fault occurred.
Fault Snap Shot Log Minute.The Minute from the time stamp information
when the last fault occurred.
Fault Snap Shot Log Second. The Seconds from the time stamp
information when the last fault occurred.
The fault that caused the last trip.
Value
0 No Faults
1 Under voltage
2 Over voltage
3 External GF
4 Residual GF
5 Current phase loss
6 Current unbalance
7 Instantaneous over current
8 Jam
9 PF Deviation
10 Voltage phase loss
11 Voltage unbalance
12 Frequency deviation fast
13 Frequency deviation slow
14 Under current
15 High power
16 Low power
17 Contactor failure
18 Starts limit exceeded
19 Overload
20 Stall
21 Phase rotation mismatch
22 PTC - See PTC State for details
23 Under voltage restart
24 Measurement Module fault
25 Communication loss on active fieldbus
26 Measurement Module not available or communication loss
with the module
27 User Interface not available or communication loss with the
module
28 Test trip was triggered
29 Option Card not available or communication loss with the
module
Description
289