Eaton C440/XTOE User Manual
  1. Manuals
  2. Brands
  3. Eaton Manuals
  4. Relays
  5. C440/XTOE
  6. User manual

Eaton C440/XTOE User Manual

Electronic overload relay, devicenet
Hide thumbs Also See for C440/XTOE:
Table of Contents

Advertisement

Quick Links

C440/XTOE Electronic Overload Relay, DeviceNet

User Manual

Effective March 2011
New Information
For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616

Advertisement

Table of Contents
loading

Related Manuals for Eaton C440/XTOE

Summary of Contents for Eaton C440/XTOE

  • Page 1: User Manual

    C440/XTOE Electronic Overload Relay, DeviceNet User Manual Effective March 2011 New Information For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...
  • Page 2 For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...
  • Page 3 The information, recommendations, descriptions, and safety notations in this document are based on Eaton Electrical Inc. and/or Eaton Corporation’s (“Eaton”) experience and judgment, and may not cover all contingencies. If further information is required, an Eaton sales office should be consulted.

  • Page 4: Support Services

    C440/XTOE Electronic Overload Relay, DeviceNet Support Services The goal of Eaton is to ensure your greatest possible satisfaction with the operation of our products. We are dedicated to providing fast, friendly, and accurate assistance. That is why we offer you so many ways to get the support you need. Whether it’s by phone, fax, or e-mail, you can access Eaton’s support information 24 hours a day, seven days a week.

  • Page 5: Table Of Contents

    DeviceNet Interface Object, Class 0x94 (C440) ......C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...
  • Page 6 NO, NC Output ............C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com...
  • Page 7 DeviceNet Interface Object Instance Attributes (C440) ......C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 8: Definitions And Symbols

    Be sure equipment is properly grounded. Wear safety glasses whenever working on electronic controllers or rotating machinery. C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 9: Introduction

    Introduction Introduction System Overview Motor Control Eaton’s new electronic overload relay (EOL) is the most Two B600 alarm (NO) and fault (NC) contacts ● compact, high-featured, economical product in its class. Test/Trip button Designed on a global platform, the new EOL covers the entire ●...

  • Page 10: Standards And Certifications

    Available in Eaton’s industry leading FlashGard MCCs ● Tested to the highest industry standards such as UL, CSA, ● CE, and IEC RoHS compliant ● C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 11: Electronic Overload Education

    50% of the other two unbalanced phases as phases. listed above. C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 12: Technical Data And Specifications

    Input, auxiliary contact and remote reset terminals Terminal capacity 2 x (18–12) AWG 2 x (18–12) AWG Tightening torque 5.3 lb-in (0.8–1.2 Nm) 5.3 lb-in (0.8–1.2 Nm) C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...
  • Page 13 120V 240V 1.5A 1.5A 480V 0.75A 0.75A 600V 0.6A 0.6A R300— Vdc ratings (28 VA) 0–120V 0.22A 0.22A 250V 0.11A 0.11A C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...
  • Page 14 IEC 61000-4-4 ±2 kV using direct method ±2 kV using direct method C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 15: Short Circuit Ratings

    Changes to UL 508A and NEC in recent years have brought a focus to control panel safety with regard to short-circuit current ratings (SCCR). Eaton’s C440 electronic overload relays combined with XT series IEC and Freedom Series NEMA contactors provide a wide variety of SCCR solutions needed for a variety of applications. The SCCR data in this document reflects the latest information as of April 2010.

  • Page 16: Nema Freedom Series Starters With C440 Electronic Overload Relays

    — 4–20A — — — 1–5A — — — 4–20A — — — 9–45A — — — 9–45A 20–100A 20–100A 20–100A C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 17: Receipt/Unpacking

    Inspect the equipment upon delivery. Report any crate or carton damage to the carrier prior to accepting the delivery. Have this information noted on the freight bill. Eaton is not responsible for damage incurred in shipping. Unpacking Remove all packing material from the unit.

  • Page 18: C440-Com-Adp Communication Module

    Rotate module up and gently click the base unit and module together. Connect DeviceNet cable and IO connector if desired. C441X Communication Module C440-COM-ADP C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 19: Input Behavior

    Nominal current Operating range 80–140 Vac Operating frequency 50/60 Hz Signal delay maximum 30 ms Input type IEC 61131-2, type 1 digital C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 20: Vdc Inputs

    Type Current sinking Input type IEC 61131-2, type 1 digital Maximum 24 Vdc source current 50 mA Isolation voltage 250 Vac C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 21: Relay Output Behavior

    Pilot duty rating B300 Thermal continuous test current Maximum current (120 Vac)— 30A/3A make/break Maximum VA (volt-amperes)— 3600 Va/360 Va make/break C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 22: Devicenet Configuration

    C440 and assume the overload profile. 0x0E Get_Attributes Returns the contents of the _Single specified data 0x10 Set_Attributes Value Modifies an attribute value _Single C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 23: Identity Instance Attributes (C440)

    — (0xB6) revision as a 2 byte number with a major and minor revision — C440 product UINT Eaton product code. If the number is odd–it is — (0xB7) code ground fault capable — C440 firmware UDINT The 32 bit checksum of the base C440 —...

  • Page 24: Status

    This state is reported when the adapter is powered up, configured and operating normally. Major recoverable fault — Major unrecoverable fault — C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 25: Message Router Object, Class 0X02 (C440)

    Actual value of node Range 0—63 value address switches — Baud rate switch USINT Actual value of baud Range 0—3 value rate switches C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 26: Assembly Object, Class 0X04 (C440)

    Input 4 Input 3 Input 2 Input 1 Output 2 Output 3 Reserved Faulted Notes Indicates default assembly instances used in poll connection. Indicates default assembly instances used in bit strobe connection. C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 27: Input Assembly 120 (C440 Short Assembly)

    Phase imbalance percentage (high byte) Value selected by DeviceNet interface Present fault bits (low byte) object, attribute 21 Present fault bits (high byte) C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 28: Output Assembly 111-Bit Strobe Command (C440)

    Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 — — Test — — Fault Out 2 Out 1 trip reset C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 29: Connection Object Instance #1 Attributes (Explicit Messaging) (C440)

    Specifies the application object(s) that are to receive the data consumed by this connection object. See DeviceNet Volume I, Appendix I. EPATH Default = Null PATH C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 30: Connection Object Instance #2 Attributes (Polled I/O) (C440)

    Default assembly instance 105 “0x62 0x36 0x39” Allowed EPATHs: 2 (0x02 ): “0x62 0x30 0x32” 105 (0x69 ): “0x62 0x36 0x39” C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 31: Connection Object Instance #3 Attributes (Bit Strobe I/O) (C440)

    Specifies the application object(s) that are to receive the data consumed by this connection object EPATH Default and fixed as assembly instance 111 “0x62 0x36 0x46” C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 32: Discrete Input Object, Class 0X08 (C440)

    Determines the value to be applied to the output terminal if a communications idle event occurs AND the “Idle action” attribute is set to “0”. Default: 0. C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 33: Control Supervisor Object, Class 0X29 (C440)

    Action taken on trip state in comm fault state trip action 0 = Use comm fault trip value attribute 1 = No affect C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 34: Faulted State

    Commands the device out of the faulted state. A transition from 0 to 1 will cause the fault reset. Faulted State Initial Value Commanded Value Result No action Reset fault No action No action C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 35: Overload Instance Service (C440)

    Presents the average current as a percent of the FLA setting. — Ground Fault % USINT Percent of ground fault measured. GF% = GFC / ([0.5]*FLA) C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...

  • Page 36: Devicenet Interface Object, Class 0X94 (C440)

    Data item assigned to Word 5 of long Default = 6 Word 5 Param user input assembly Current as a % of FLA C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...
  • Page 37 (B0 = ON and B1 = ON). The switch values determine MAC ID and baud rate when the baud rate switches are not set to 3. C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...
  • Page 38 DeviceNet Configuration C440/XTOE Electronic Overload Relay, DeviceNet MN04210002E—March 2011 www.eaton.com For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...
  • Page 39 For Immediate Delivery or Tech Support call KMParts.com at (866) 595-9616...
  • Page 40 Cleveland, OH 44114 United States 877-ETN-CARE (877-386-2273) Eaton.com ©2011 Eaton Corporation All Rights Reserved Eaton is a registered trademark of Eaton Printed in USA Corporation. All other trademarks are Publication No. MN04210002E / Z10843 property of their respective owners. March 2011...

Table of Contents