Eaton Power Xpert C445 User Manual page 25

Chapter 1—Power Xpert C445 Overview
Power Xpert inControl Software Tool Basic
Overview
Power Xpert inControl device configuration and control
software is a FDT/DTM based Software Tool used for
configuration of the C445. This tool has been developed
to provide a simple interface for configuration, monitoring
and troubleshooting. The software consists of two major
parts—the Field Device Tool (FDT) software, which is also
known as the "frame application", and the Device-Type
Managers (DTM). The DTM portion is further classified into
two categories: Device DTMs which connect to the field
devices configuration components, and Communication
DTMs, which connect to the communications components
of the device.
Pre-Defined Operating Modes Basic Overview
The C445 relay has several predefined configurations
referred to as operation modes. Selecting one of these
operation modes will determine the behavior of some or
all of the inputs and outputs of the C445 relay.
Overload Only
●
Direct Online
●
Reverser
●
Star/Delta
●
Two Speed Two Winding
●
Two Speed Dahlander
●
Auto Transformer
●
Solenoid Valve
●
MCCB Actuation
●
Contactor Feeder
●
General Purpose Input/Output
●
See System Operation on Page 65 for detailed explanations
of each operating mode.
12 Power Xpert C445 Global Motor Management Relay MN042003EN—October 2016 www.eaton.com