Table 96. Control Supervisor Object-Class 0X29 - Eaton Power Xpert C445 User Manual

Appendix C—Optional Communication Cards
Table 96. Control Supervisor Object—Class 0x29 (41)
Class Services
ID Service
0x0E Get Attribute Single
Instance Services
ID Service
0x0E Get_Attribute_Single
0x10 Set_Attribute_Single
0x05 Reset Service
Class Attributes
Sr. No. ID Access Rule
1 1 (0x1) Get
2 2 (0x2) Get
3 3 (0x3) Get
Instance Attributes
Sr. No. ID Access Rule
1 3 (0x3) Set
2 4 (0x4) Set
3 5 (0x5) Set
4 7 (0x7) Get
5 8 (0x8) Get
6 9 (0x9) Get
7 11 (0xB) Get
8 12 (0xC) Set
9 13 (0xD) Get
10 15 (0xF) Get
11 17 (0x11) Set
196 Power Xpert C445 Global Motor Management Relay MN042003EN—October 2016 www.eaton.com
Data Type Name
UINT Revision
UINT Max Instance
UINT Number of
Instances
Data Type Description
BOOL Run1
BOOL Run2
BOOL NetCtrl
BOOL Running1
BOOL Running2
BOOL Ready
BOOL Warning
BOOL FaultRst
UINT Fault Queue-1
BOOL CtrlFromNet
BOOL CIP Force Fault
(Need
Dependent DCID
in BCM)
Requirements
Type 0
Description
Run/Stop Event Matrix
Run/Stop Event Matrix
Requests Run/Stop control to be local or from network.
0 = Local Control
1 = Network Control
Note that the actual status of Run/Stop control is reflected in
attribute 15, CtrlFromNet.
1 = (Enabled and Run1) or (Stopping and Running1) or
(Fault_Stop and Running1)
0 = Other state
1 = (Enabled and Run1) or (Stopping and Running1) or
(Fault_Stop and Running1)
0 = Other state
1 = Ready or Enabled or Stopping
0 = Other state
1 = Warning (not latched)
0 = No Warnings present
R
0 1 = Fault Reset
0 = No action
A list of faults based on most recent. Duplicates are not
allowed. They are sorted by event with the newest at the top
of the queue.
Status of Run/Stop control source.
0=Control is local
1=Control is from network
R
0 1 = Force
Default Range
1 —
1 —
1 —
0 0 – 1
0 0 – 1
0 0 – 1
0 0 – 1
0 0 – 1
0 0 – 1
0 0-1
0 0 – 1
0 0 – 1