Table of Contents
Advertisement
CHAPTER
4
OVERVIEW
An AutoRAE 2 Cradle can be deployed as a stand-alone station for automatic charging, bump
testing, and calibrating monitors, or as part of an AutoRAE 2 Controller-based system, which
can accommodate up to 10 AutoRAE 2 Cradles. These can be all the same or a mix of MultiRAE,
MicroRAE, QRAE 3, and ToxiRAE Pro models, as well as MiniRAE Lite, MiniRAE 3000, ppbRAE
3000, and UltraRAE 3000.
When an AutoRAE 2 Cradle is connected to the AutoRAE 2 Controller, all electrical, electronic,
and gas connections are automatically internally connected. A controller-based system can
accommodate up to five distinct gas sources for multi-sensor calibration and bump testing.
An AutoRAE 2 Cradle can be used on a tabletop (or other flat surface) or mounted on a wall.
Wall-mounting instructions are included in this guide.
AutoRAE 2
14
User Manual
Advertisement
Table of Contents
