Installation Of Inner Finisher - Canon Inner Finisher-J1 Service Manual

Installation of Inner Finisher

1. Open the Front Cover, and then remove the
Disconnect Lever.
• 1 Screw
1x
2. Fix the screw removed in Step1 to the original
position. Close the Front Cover.
• 1 Screw (W Sems; M3x6)
1x
3. Connect the connectors of the Finisher Cable
Harness to the Inner Finisher.
• 2 Connectors
2x
4. Install the Stack Tray.
86
6. Installation