deactivating the Bluetooth mode.
8.6 Viewing the Bluetooth Device I nformation
You can view the Bluetooth device information when the Bluetooth mode is activated.
Before You Begin: Make sure that the Bluetooth mode is activated, and the Bluetooth device has
been paired on your phone.
Procedure
1. Navigate to Menu > Basic > Bluetooth >Paired Bluetooth Device.
On the T57W phones, navigate to Menu > Basic > Bluetooth.
•
2. Do one of the following:
On the T54W phones, select the desired Bluetooth device.
•
Select Option >Detail to view the device name, device MAC address, and the
o
synchronization status.
On the T57W phones, view the device name, device MAC address, and the connection status from
•
the Bluetooth Device(s) field
8.7 Handling a Mobile Phone Call on the Phone
You can handle a mobile phone call on your phone, the phone acts as a speaker and microphone
for your mobile phone.
The call information appears on both your phone and mobile phone screen. You can control the
call's audio to go through the mobile phone or phone on your mobile phone. For example, if you
choose Bluetooth, the audio will go through the phone; if you choose Handset or Speaker, the
audio will go through the mobile phone.
Before You Begin: Make sure that the Bluetooth-enabled mobile phone is paired and connected to
your phone.
Procedure
1.
Do the following on the phone:
Place a call. Press the My Mobile key first, and then place a call or multiple calls to the
•
mobile contact.
Answer a call. An incoming call to your mobile phone is also shown on the phone, you
•
can answer the call on the phone. The contacts will be firstly matched with those in the
mobile contacts directory to present the caller identity when receiving a mobile phone
call.
During the call, you can hold/resume, mute/unmute or end the call on the phone.
•
8.8 Editing Device Name of Your Phone
You can edit the device name of your phone for easily recognizable.
MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
96