Preface - Siemens SIMATIC ET 200S M151-3 PN Manual

Preface

Preface
Purpose of the manual
This manual supplements the
Functions that apply generally to the ET 200S are described in the ET 200S distributed I/O
system (http://support.automation.siemens.com/WW/view/en/1144348) operating
instructions.
The information in this document along with the operating instructions enables you to
commission the ET 200S.
Required basic knowledge
To understand these operating instructions you should have general knowledge of
automation engineering.
Scope of the manual
The manual applies to this ET 200S module. It describes the components that are valid at
the time of publication.
The manual is valid for the IM151-3 PN HIGH FEATURE ((6ES7151-3BA23-0AB0)) firmware
version V7.0 and higher.
Changes since the previous version
The following changes have been implemented compared to the
IM151-3 PN HIGH FEATURE(6ES7151-3BA23-0AB0) Manual, Edition 03/2009, with the
number A5E01584256-02:
● Shared Device
● Media redundancy
● Option handling
● LED display of the configuration and parameter assignment errors
● PROFIenergy
Recycling and disposal
Thanks to the fact that it is low in contaminants, this ET 200S module is recyclable. For
environmentally compliant recycling and disposal of your electronic waste, contact a
company certified for the disposal of electronic waste.
Interface module IM151-3 PN HIGH FEATURE (6ES7151-3BA23-0AB0)
Manual, 08/2010, A5E01584258-04
ET 200S Distributed I/O System
Operating Instructions.
3