Printing - Standard Mode; Preparing For Printing - SINTERIT Lisa Pro User Manual

9. Printing - STANDARD MODE
A. Preparing for printing
1. Load the file for printing:
a. save the file prepared using the
Sinterit STUDIO 2019 to a USB
carrier
recommended).
b. connect the carrier to the printer's
USB port, with its power turned on.
2. After mounting the flash drive into LISA
PRO USB port, LOAD FROM USB section
will be displayed and a flash drive icon will
appear on the left side of sections.
IMPORTANT!
After uploading the model on the printer's internal storage, printed projects
can be chosen from RECENT MODELS.
3. Choose source. Titles of project files will be displayed. Displayed arrows will help to
navigate through folders and files.
4. After choosing a file, it will be loaded into the device's memory.
5. After loading the file, the display will show
basic informations such as: the file's name,
material and expected printing time. The flash
drive can be then safely removed (Image 15).
6. Software will allow you to return to previous
section or proceed to the next. After choosing
the next section, Sinterit LISA PRO will check
whether it is ready to print.
24
(USB flash drive
Image 20. Loading the print file screens.
​
Sinterit Lisa PRO USER
Image 19. Connecting a USB flash drive to the LISA
PRO printer screen.
Image 21. Basic information after loading the file
to the printer's screen.
MANUAL