Printing - Standard Mode - SINTERIT Lisa Pro Shortened User Manual

3. Printing – STANDARD MODE
1. Load the file for printing:
• save the file prepared using the Sinterit
STUDIO 2019 to a USB carrier (USB flash drive
recommended),
• connect the carrier to the printer's USB port
with its power turned on.
2. After mounting the flash drive into LISA PRO USB
port, LOAD FROM USB section will be displayed
and a flash drive icon will appear on the left side
of sections (Image 13).
IMPORTANT!
After uploading the model on the printer's internal storage, printed projects can be chosen
from RECENT MODELS.
3. Choose source. Titles of project files will be displayed. Displayed arrows will help to navigate through folders
and files.
4. After choosing a file, it will be loaded into the device's memory.
5. After loading the file, the display will show basic
informations such as: the file's name, material and
expected printing time. The flash drive can be then
safely removed (Image 15).
6. The software will allow return to previous section
or proceed to the next. After choosing the next
section, Sinterit LISA PRO will check whether it is
ready to print.
WARNING!
Carefully read all messages displayed on the screen while preparing the machine for
printing. Skipping the described operations may result in incorrect printing or machine
failure.
,
Image 13. Connecting a USB flash drive to the LISA PRO
Image 14. Loading the print file screens.
Image 15. Basic information after loading the file to the
printer screen.
printer screen.
Sinterit Lisa PRO USER MANUAL (short version) | 7