SINTERIT Lisa Pro User Manual page 28

10. Once both BEDs are covered with a
smooth
LEVELING
screen.
11. The RECOATER will return to its
default position.
The operation may complete quicker:
whenever
covers the PRINT BED surface you
can press STOPPING .
12. When the levelling is done and the RECOATER has returned to its default position,
the cleaning process must be initiated.
● Use a wipe soaked with alcohol
(ethanol or salicylic alcohol 2%) to very
carefully clean the vision windows of
the camera and pyrometers.
● Clean the infrared heaters (white and
red ones) by gently blowing on them
with clean compressed air.
13. Ensure that no tools or previous printouts
are left in the printing chamber.
14. Clean any excess powder from the area
around the BEDs, the guide bar and the
wire of the RECOATER, using a paint
brush.
15. Lubricate
RECOATER with the included silicone
grease.
16. Press DONE and gently close the Lid.
IMPORTANT!
If quality of distributed powder is unsatisfying, close upper lid and press
BACK button. Unlock Lid and start the Leveling procedure/process again.
27
layer of powder, press
DONE on the LCD
the powder uniformly
the plain bearing
Image 29. LEVELING DONE screen.
Image 30. Stopping the leveling process manually screen.
Image 31. Clean the pyrometer screen.
of the
Image 32. Finalizing preparations for printing.
​
Sinterit Lisa PRO USER MANUAL